Weebot presents its range of electric scooter brake handles
Discover our brake handles or brake levers for electric scooter easy to install at a low price and fast delivery!
You will find quality braking on your electric scooter in no time thanks to our different selections of detached pieces for electric scooter.
If you cannot find the reference for your electric scooter, you can contact us on sav@wee-bot.com or call us on 01 76 31 00 85
What is an electric scooter brake handle?
The brake handle of an electric scooter is a spare part that allows the driver to control speed and stop safely. These brake levers are usually mounted on the handlebars and allow the driver to brake by pulling the corresponding lever.
There are different types of brake handles for electric scooters.
There are mainly two types of brake handles on electric scooters: mechanical brake handles and hydraulic brake handles. There are also electronic brakes which are controlled by a button on the handlebars or the motor.
It is important to regularly check the condition of your brake handle to ensure they are working properly and replace them if necessary to ensure safe use.
-
What is a brake handle for an electric scooter used for?
The electric scooter brake handle is used to control speed and to stop safely. When you pull the brake handle, it activates the electric scooter braking system, which allows the vehicle to be slowed down or completely stopped.
The brake handle allow the driver to react quickly and efficiently in the event of an emergency on the road. This is an important part of ensuring driving safety. If your brake handle is in poor condition, there may be a lack of braking, which can cause serious accidents. It is therefore important to regularly check the condition of your brake handle and replace them if necessary to ensure safe use.
-
How to maintain your electric scooter brake handles?
To maintain your electric scooter brake handles, here are a few steps to follow:
-
Check the condition of the brake handles often to detect any wear or damage. If the handles are worn or damaged, it is recommended to replace them.
-
Clean the brake handles constantly to remove any accumulated dirt or dust. Use a clean, dry cloth to gently clean the handles.
-
Check that the handles fit properly and that they do not move when using the electric scooter. If the handles fit incorrectly, check your scooter's instruction manual to find out how to adjust them correctly.
-
Grease the brake handles if necessary to ensure smooth movement. Use a small amount of lubricant to grease the handles, being careful not to get any on the braking surfaces.
By following these simple steps, you can keep your electric scooter brake handles in good working order and ensure safe use.
-
Are all electric scooter brake handles compatible with each other?
The compatibility of the brake handle for electric scooter is an important aspect to consider when purchasing a new handle.
It is essential to ensure that the brake handle is compatible with the brand and model of your electric scooter to ensure maximum safety when using it. Although some brake levers may be universal, it is always recommended to check the technical specifications before making a purchase.
If in doubt, it is best to contact us for advice on compatibility. Ultimately, choosing a brake handle that is compatible with your electric scooter is essential to ensuring optimal safety and performance.
The most asked questions about electric scooter brake handles
For THE utilisators Who onhaitent in savbecause plus on cAnd It ismightment essentiel of theur believettinahead It islectrisk, nous inous aboutwe This guide that answers the most frequently asked questions.
-
Should you maintain your electric scooter brake handles?
Yes, it is recommended tomaintain the brake handles for electric scooters daily to ensure their proper functioning and safe use. This involves checking the condition of the handles often, cleaning them if necessary, adjusting them correctly, and replacing them if they are worn or damaged. Regular maintenance of the brake handles helps ensure effective and safe braking, which is essential for user safety.
-
How do I know if the brake handles on my electric scooter are worn and need to be replaced?
There are a few signs to look out for to detect if your brake handle is worn and needs to be replaced:
-
Squeaking noise : If you hear a grinding noise when you brake, this may indicate that the brake pads are worn and need to be replaced.
-
Sensation of less braking : If you notice that you have to pull the brake lever harder to get the same level of braking as before, this may indicate that the brake pads are worn.
-
Excessive brake lever travel : If you notice the brake lever moving more than usual before you feel any real resistance, this may indicate that the brake pads are worn.
-
Platelet status : It is also important to regularly check the condition of the brake pads to see if they are worn. If the pads are thick, it means they do not need to be replaced at this time. If the pads are thin or worn to the core, it's time to replace them.
It is also recommended to continually check the condition of your brake handle and replace it if necessary to guarantee a quality user experience. It is recommended that you consult your machine's operator's manual for information on maintenance frequencies and brake handle replacement procedures.
-
How do I replace the brake lever on my Xiaomi M365, Xiaomi essential, Xiaomi 1s and Xiaomi Pro 2 electric scooter?
To change these brake handles on your machine will depend on the type of brakes you have. Here is the procedure we used to change the brake handle of a Xiaomi M365, Xiaomi essential, Xiaomi 1s and Xiaomi Pro 2 electric scooter:
-
First of all, it is important to check that you have the right tools to replace the brake lever of your Xiaomi M365. You will need a pipe wrench to remove the nuts that hold the front wheel in place.
-
Use the pipe wrench to remove the two nuts which hold the front wheel in place. Remove the front wheel from your machine to have easier access to the brake lever.
-
Remove the electrical cables that connect the brake lever to the electronic control unit using a flat screwdriver or similar tool.
-
Use a flat screwdriver to remove the screws which hold the brake lever in place. Remove the existing brake lever.
-
Install the new brake lever securing it with the screws removed in the previous step. Make sure all cables and electronic components are properly connected.
-
Reconnect the electrical cables which connect the brake lever to the electronic control unit.
-
Replace the front wheel in place by hand tightening the nuts. Tighten them with the socket wrench to ensure the wheel is secure.
-
Test the brake lever to make sure it is working properly before riding again.
It is important to note that the procedure described above is a general procedure for Xiaomi M365 and the complexity of the change can quickly be increased because of the type of brake handle you will have on your machine...
However, these steps for changing the brake handle for the Xiaomi M365 are the same for:
-
The Xiaomi M365 Electric Scooter
-
The Electric Scooter Xiaomi M365 Pro 2
-
The Electric Scooter Xiaomi Essential
-
The Electric Scooter Xiaomi 1s
It is also recommended to consult a professional if you have any doubts about the replacement procedure. Do not hesitate to make an appointment at one of our electrical product repair and sales centers.
-
What is the difference between mechanical brake handles and hydraulic brake handles on an electric scooter?
Mechanical brake handles and hydraulic brake handles are two different types of brake handles for EDPM.
Mechanical brake handles are the most common, they work by using a cable that connects the brake handle to the braking system. When you pull the brake lever, it pulls on the cable that operates the brakes.
Mechanical brake handles are generally simpler and more affordable, but they may require more maintenance and may perform less well than hydraulic brake handles.
Hydraulic brake handles use an oil-based system to operate the brakes. When you pull the brake lever, it compresses a pump that sends oil through a pipe to the brake calipers.
Hydraulic brake handles are usually more efficient and more precise than brake handles mechanical, but they can also be more expensive and more complicated to maintain.
It is important to note that both types of brake handles have their own advantages and disadvantages and it is important to consider driving needs and personal preferences before choosing between mechanical or hydraulic brake levers.
It is also possible to find hybrid brake handles which combine the advantages of both types of systems, however they are usually more expensive.
Why shop at Weebot?
At Weebot, you get all the benefits of premium quality. Inasmuch as leader in electric mobility in France, we offer you unrivaled support, with professional advice available by phone or email, as well as free delivery and premium technical support.
We are more than just a reseller. Thanks to our expertise in electric scooters, we design our products to meet high quality requirements.
You can be sure to buy a brake handle of superior quality qwhether it is for an electric scooter Xiaomi M365 Pro, Dualtron, Weebot, Welcome, Speedway, Speedtrott, Zero, E-Tow, Vsett, Eroz Tavern or Inöe we have the part available in stock.
-
#1 Fast delivery
By purchasing brake handles for your electric scooter with us, you are guaranteed to receive a high-end spare part in lFast delivery available within 48 hours!
-
#2 Payment in installments
For us, the mobility sector must be available to everyone to facilitate your daily journeys.
Thanks to our partners, you are offered the possibility of paying in 2 to 48 installments !
-
#3 Service client
During these 10 years in the sector of electric mobility, we have supported thousands of customers throughout France. We manage to find a solution to any problem. We make sure that you are the center of our attention in order to provide you with quality service.
We strive every day to continually improve our processes and nos services with the aim of offering you the best possible customer experience.
-
#4 Our stores in France
Today, Weebot has been present in the electric mobility market for 10 years and is present in several cities such as Paris (Boulogne Billancourt and Courbevoie), Bordeaux and Lyon!
-
Weebot Paris Service Center - Boulogne Billancourt - Telephone: 01 80 89 45 52
-
Boutique Show Room Weebot Paris - Courbevoie - Telephone: 01 80 89 45 52
-
Weebot Lyon Service Center - 2nd District - Telephone: 04 91 91 66 81
-
Service Center Weebot Bordeaux - Centre Ville - Telephone: 05 64 88 03 00
If you have the slightest concern about the brake handles, do not hesitate to contact our technical service available every day from Monday to Friday at the following address sav@wee-bot.com.
Our teams will assist you in resolving the problem you may have encountered remotely or on site!
Also benefit from fast and hassle-free delivery!
-
#5 Guarantee
At Weebot we want you to feel safe when purchasing a electric scooter spare part.
This is why we offer a 2 year warranty against defects and breakage of spare parts. And if you ever encounter a problem, we take care of everything! We will pick up your scooter from your home and bring it back to our service centers in Lyon, Boulogne-Billancourt or Bordeaux.
Additionally, if you are close to one of our centers, you can also bring your scooter directly for a quick diagnosis. We offer a premium service that far exceeds what our competitors offer.