Inner Tube 10 inches (10x2) Right Valve for Inoe Bloomy and Tweeky Electric Scooter

Description 10-inch inner tube for Inoe Bloomy and Tweeky electric scooters - 90° angled

Electric scooters have become increasingly popular in recent years. THE models Inoe Bloomy and Tweeky are two of the most popular models.

These scooters have 10 inch wheels who give them a great stability and an good adhesion on all surfaces.

Here we will discuss the importance of 10 inch inner tubes for these scooters and what you need to know about replacing them.

The quality of 10-inch inner tubes for Inoe Bloomy and Tweeky electric scooters

Inner tubes are a crucial part of the wheel of your electric scooter. They are responsible for the air pressure which allows the wheel to support the weight of the rider, the scooter and the irregularities of the road.

Poor quality inner tubes can puncture easily, causing punctures and accidents. It is therefore important to choosing premium quality inner tubes for your Inoe Bloomy or Tweeky electric scooter.

THE high quality rubber inner tubes are more resistant to punctures and last longer than rubber chambers low end.

How to replace a 10-inch inner tube for Inoe Bloomy and Tweeky electric scooters

The replacement of a 10-inch inner tube for your Inoe Bloomy or Tweeky electric scooter may seem difficult, but it's actually quite simple.

1. First of all, remove the wheel from the scooter by unscrewing the bolts that hold it in place.
2. Afterwards, remove the used inner tube And install the new inner tube by sliding it inside the tire. Make sure the tube is centered and place the tire back on the wheel.
3. Repeat the procedure for the other wheel if necessary.

If you do not want to take the risk of changing the inner tube of your electric scooter yourself, do not hesitate to come to one of our workshops for a quality repair !

Here is a video that will help you change your inner tube:

The Compatibilities of the 10-inch Inner Tubes for Inoe Bloomy and Tweeky Electric Scooters

Inexpensive inner tube compatible with the following electric scooters:

• Inner Tube for Electric Scooter Inoe Bloomy (for Front tire only)
• Inner tube for Electric scooter Inoe Tweeky (for Front tire only)
• Inner Tube for Electric Scooter PURE Air Pro (for rear tire only)

Autres modèles compatibles : The-Urban #HMBRG V2, Egret Ten V3 X, Inokim OX, Inokim Quick 3 Super, Inokim Quick 4 Super, Moovway X12

If you do not see your electric scooter in the list below, it may not be compatible... However, in order for you to be 100% sure, do not hesitate to contact our technical service to ensure compatibility or so that we can direct you to the type of inner tube you need!

Our Tips for properly maintaining your 10-inch Inner Tubes for Inoe Bloomy and Tweeky Electric Scooters

Here are some tips for properly maintaining the 10-inch inner tube for Inoe Bloomy and Tweeky electric scooters - 90° angled :

• Check tire pressure regularly : The recommended pressure for the tires of the Inoe Bloomy and Tweeky scooter depends on the weight of the user. It is important to check tire pressure regularly, at least once a month, and inflate the tires to the recommended pressure..
• Use quality inner tubes : Quality inner tubes are designed to withstand pressure and provide an optimal riding experience. It is therefore recommended to use quality inner tubes to avoid repeated punctures.
• Change inner tubes regularly : Inner tubes have a limited lifespan and must be changed regularly to avoid punctures. If you notice signs of wear or aging, it's time to change the inner tube.
• Clean your electric scooter regularly : To prevent dirt from accumulating on your electric scooter, it is recommended to clean it regularly with a soft, damp cloth.
• Learn how to change an inner tube : It is important to know how to change an inner tube so that you can do it quickly in the event of a puncture. 

By following these tips, you will be able to extend the life of your inner tube and avoid repeated punctures on your Inoe Bloomy and Tweeky electric scooter.

Characteristics 10-inch inner tube for Inoe Bloomy and Tweeky electric scooters

• Inflatable wheel size : 10 inches
• Size : 10 inches x 2 inches
• Without Valve cap
• Pressure required to avoid punctures: between 2.5 and 3 bars
• Color : black
• 0x90° degree elbow valve

(Non contractual photo)