Changing the battery of your electric scooter is not as difficult as one might think. Every electric scooter enthusiast should be able to do it, provided they have the right tools and carefully follow the instructions. This guide will walk you through step-by-step to replace your internal or external battery with ease and safety.
Necessary equipment to replace the electric scooter battery
Here is the list of tools you need to replace the electric scooter battery.
• Screwdriver: to unscrew the battery cover and remove the screws.
• Adjustable wrench or socket wrench: depending on the screws used to hold the battery in place.
• Multimeter (optional): to test the battery voltage before and after installation.
• Protective gloves: to avoid any risks related to handling the battery.
• Safety glasses: to protect your eyes.
Steps to replace the internal battery of your electric scooter
WARNING, safety first! Always disconnect your electric scooter from any power source.
Step 1: Using a screwdriver, remove the screws from the deck or cover to access the internal battery. It is hidden under a compartment located beneath the deck.
Step 2: Unplug the electrical connectors and remember their positions. If you have a multimeter, test the battery voltage before removing it.
Step 3: Unscrew the screws or fasteners holding the battery in place. Carefully lift the battery to avoid damaging the cables.
Step 4: Insert the new battery in the correct position. Reconnect the cables, making sure to respect the polarities (red wire to positive and black to negative).
Step 5: Briefly test the electric scooter to confirm it is working properly. If everything is in order, replace the cover or deck and screw it firmly back on.
This Weebot video explains in detail what to do.
Steps to replace the external battery of your electric scooter
As with the internal battery, start by turning off the electric scooter and disconnecting it from any outlet. Then remove the external battery by following these simple steps.
Step 1: The external battery may be located on the side of the scooter or in an accessible compartment. Open this compartment to remove the battery.
Step 2: Unplug the defective battery. Disconnect the power cables gently. Do not force!
Step 3: Place the new battery in the designated compartment and reconnect the cables.
Step 4: Briefly test your electric scooter to ensure everything is working well. Then close the compartment and put the battery back in place.
Replacing the battery of your electric scooter has never been easier! The key is to carefully follow each step and work with quality equipment. If you need help, our technicians are ready to assist you.