Electric Scooter Charging Port

What is an electric scooter charging port?

And electric scooter charging port is a connector located on the electric scooter which allows you to connect the battery charger to recharge the battery of the scooter.

The charging port may be located in different locations on the electric scooter depending on the model, but is usually located at the deck, at the front of the scooter.

The charging port is designed to be easily accessible so users can easily connect and disconnect the charger from the battery.

Moreover, the charging ports Electric scooters often have a locking system to hold the battery charger in place during the charging process.

IMPORTANT : It is vital to ensure that the battery charger is compatible with the charging port of the electric scooter to avoid any potential damage to the scooter or battery.

• What are the types of charging ports for electric scooters?

At Weebot, you will find the most common charging ports on electric scooters:

• The GX-16-3 charging port
  
  The GX-16-3 charging port is a type of charging port frequently used on high-end electric scooter models and offers fast and efficient charging. The GX-16-3 port is a pin port, which means it uses a series of metal pins to connect to the electric scooter's charger.
  
  
• The charging port LP-16-3
  
  The charging port LP-16-3 is a newer type of charging port that is now used on all new Minimotors scooters. Unlike the GX-16-3, the LP-16-3 has three pins in its charger and not on the charging port.
  
  
• The single-pin charging port (Xiaomi)
  
  The single pin charging port is one of the most common types of charging ports on electric scooters. It consists of a small metal pin that is inserted into a corresponding slot on the charger. To charge your electric scooter, you must first locate the charging port, which is often located on the side of the electric scooter.

• What is the most important information to know before charging your electric scooter?

Before charging your electric scooter, it is important to understand the voltage and amperage needed to charge your electric scooter. The tension is measured in volts (V) and amperage is measured in amps (A).

The voltage and amperage needed to charge your electric scooter varies depending on the model of your electric scooter.

ATTENTION : It is important to check the charging specifications of your electric scooter and ensure you are using a charger that is compatible with the recommended charging specifications.

If you use an incorrect charger, it may damage your electric scooter or the battery, which may result in high repair costs. It is therefore crucial to take into account the voltage and amperage required before charging your electric scooter.

The most asked questions about electric scooter charging ports

For THE utilisators Who onhaitent in savbecause plus on cAnd It ismightment essentiel of theur believettinahead It islectrisk, nous inous aboutwe This guide that answers the most frequently asked questions.

• What are the things not to do with an electric scooter charging port?

We have put together a list of Things not to do with your charging port to help you keep it and your electric scooter well

1. Do not use an incompatible charging port.
2. Do not overcharge the battery.

3. Do not use a damaged or worn charging cable.

4. Do not expose the charging port to rain or moisture.

5. Do not use more than one fast charger.

By respecting these 5 points, you can be sure not to damage your charging port and thus keep your electric scooter in good condition.

• How much does an electric scooter charging port cost?

The price of a charging port for an electric scooter wasie in fonction of type of port. THE ports THE plus simples oninvent coandto have entre 10 and 20 euros, tandis what THE ports new generation oninvent coandto have entre 20 and 30 euros.

• How does an electric scooter charging port work?

A charging port for an electric scooter is made up of a charging port, of a power cable and one plug.

To use the charging port, simply plug the power cable into the power outlet located on the charging port, then plug the cable into the outlet located on your electric scooter.

Once plugged in, the charging port sends current to your electric scooter and charges it.

Charging time may vary depending on battery and charging port power. 

• Why does my electric scooter charge very slowly?

There are several reasons that can explain why your electric scooter gradually recharges.

The first reason is the power of the charging plug and charging cable.
If the plug or cable is not powerful enough, the scooter may not be able to charge properly. Check plug and cable specifications And make sure they are powerful enough for the charge.

The second reason could be that your charging port has damage that is preventing your electric scooter from charging. A damaged charging port may not be able to charge properly. Make sure it is not damaged and check its connections and terminals.

The third reason could be that it was not completely discharged before being recharged. A scooter that is not fully discharged may take longer to charge. So make sure it is completely discharged before recharging it.

Why shop at Weebot?

At Weebot, you get all the benefits of premium quality. As lleader of electric mobility in France, we offer you unrivaled support, with professional advice available by phone or email, as well as free delivery and premium technical support.

We are more than just a reseller. Thanks to our expertise in electric scooters, we design our products to meet high quality requirements.

You can be sure to buy a premium charging port qwhether it is for an electric scooter Xiaomi M365 Pro, Dualtron, Weebot, Welcome, Speedway, Speedtrott, Zero, E-Tow, Vsett, Eroz Tavern or Inöe we have the part available in stock.

• #1 Fast delivery

 By purchasing charging ports for your electric scooter with us, you are guaranteed to receive a high-end spare part in lFast delivery available within 48 hours!

• #2 Payment in installments

For us, the mobility sector must be available to everyone to facilitate your daily journeys.
Thanks to our partners, you are offered the possibility of paying in 2 to 48 installments !

• #3 Service client

During these 10 years in the sector of electric mobility, we have supported thousands of customers throughout France. We manage to find a solution to any problem. We make sure that you are the center of our attention in order to provide you with quality service.

We strive every day to continually improve our processes and nos services with the aim of offering you the best possible customer experience.

• #4 Our stores in France

Today, Weebot has been present in the electric mobility market for 10 years and is present in several cities such as Paris (Boulogne Billancourt and Courbevoie), Bordeaux and Lyon!

1. Weebot Paris Service Center - Boulogne Billancourt - Telephone: 01 80 89 45 52

2. Boutique Show Room Weebot Paris - Courbevoie - Telephone: 01 80 89 45 52

3. Weebot Lyon Service Center - 2nd District - Telephone: 04 91 91 66 81

4. Service Center Weebot Bordeaux - Centre Ville - Telephone: 05 64 88 03 00

If you have any concerns about charging ports, do not hesitate to contact our technical service available every day from Monday to Friday at the following address sav@wee-bot.com.

Our teams will assist you in resolving the problem you may have encountered remotely or on site!
Also benefit from fast and hassle-free delivery!

• #5 Guarantee

At Weebot we want you to feel safe when purchasing a electric scooter spare part.

This is why we offer a 2 year warranty against defects and breakage of spare parts. And if you ever encounter a problem, we take care of everything! We will pick up your scooter from your home and bring it back to our service centers in Lyon, Boulogne-Billancourt or Bordeaux.

Additionally, if you are close to one of our centers, you can also bring your scooter directly for a quick diagnosis. We offer a premium service that far exceeds what our competitors offer.