Motip Electrical Contact Cleaner 500 ml

Description of Motip Contact Cleaner 500 ml

High-quality contact cleaner that ensures permanent conductivity of the electrical conductors of your scooter.

Motip's contact cleaner removes deposits of grease, dust, moisture and oxidation responsible for poor contacts on electrical and electronic circuits.

The purpose of using an electrical contact cleaner is to perform cleaning of electrical components so that they can function properly for an extended period of time.

Whether it's oil, grease, corrosion or a food substance contaminating an electrical or electronic component, a contact cleaner can be used to effectively dislodge all of these foreign elements so that the components can be put back together. in their original condition.

Protect the long-term electrical performance of your electric scooter!

Tip: Wait at least 15 minutes before reconnecting electrical and electronic devices to allow time for the solvents to evaporate.

Tips for using Motip Contact Cleaner

If you use a product with a removable battery (on an electric scooter for example), it is advisable to regularly spray the battery contactors in order to remove any dirt that could accumulate.

1. Turn off power and allow hot surfaces to cool.
2. Ensure that all stored current is properly drained from the system.
3. Shake the aerosol well.
4. Hold the aerosol 15-20 cm away from the surface and spray directly onto the electronic component or circuit board.
5. Tilt the surface while cleaning to drain off any excess cleaner.
6. Allow product to dry completely and thoroughly ventilate system before restoring power.

Characteristics of the Motip Contact Cleaner 500 ml

• Capacity: 500ml
  
• Type: Spray
• High dissolving power
• Removes dirt and oxidation
• Leaves no residue
• Non-conductive and Non-corrosive