Weebot presents its range of electric scooter accelerators
If your display falls or breaks, replace it detached pieces for your electric scooter. Take advantage of our high-end digital displays with acceleration trigger at a low price and fast delivery and benefit from a user experience like the first day!
Eye 4 Display Kit (Bluetooth) for Dualtron Minimotors Electric Scooter
What is an accelerator for an electric scooter?
L' accelerator of an electric scooter is a key component that helps control vehicle speed. It is generally a lever located on the handlebar which is connected to an electronic sensor in the engine.
The operation of this device is very simple and intuitive. Its role is to influence the regime electric scooter motor and cause the gear to change.
When the lever is operated, the sensor sends a signal to the motor controller to increase the speed of the electric scooter. The more the lever is pushed, the more the electric scooter accelerates.
It is important to note that the operation of the accelerator depends on the quality and capacity of the battery, as well as the power of the engine. When using the accelerator, it is recommended to start slowly and gradually increase speed, while monitoring traffic and obstacles.
It is also important to understand how the accelerator works so that you can use it safely and effectively.
-
What is an accelerator for an electric scooter made of?
A Trigger Accelerator
Efficient and certainly responsive, a accelerator for electric scooter allows you to dose the power of your device with a simple movement of the finger. You have control of your vehicle's acceleration with your index finger or thumb depending on the product.
Thanks to this quality equipment, you will find the optimal driving speed as in the early days.
Handlebar Information Display
The trigger acts as dashboard for your electric scooter. Most of our products sold on our online store are equipped with a display that will show you various information about your driving in real time:
-
Speed display
-
Digital voltage
-
Remaining power
-
Kilometers traveled
-
Battery percentage remaining
-
Battery life
-
Driving mode
Us accelerators with display also display the problems reported with your electric scooter. Error codes can then tell you where the problem with your product is coming from.
This spare part accessory is compatible with many e-scooter models. Remember to carefully check compatibility with your product.
-
The most popular references on the market that you will be able to find
Here is the list of accelerator references with display for electric scooters that you will be able to find on this page:
And many others...
The most asked questions about the electric scooter accelerator
For THE utilisators Who onhaitent in savbecause plus on cAnd It ismightment essentiel of theur believettinahead It islectrisk, nous inous aboutwe This guide that answers the most frequently asked questions.
-
The accelerator on my display is not working, what should I do?
There are several reasons why theaccelerator of your electric scooter does not work, here are some steps to follow to resolve the issue:
-
Check the connections : Make sure all connectors and cables are securely connected and that there are no exposed wires or visible problems.
-
Check the battery : Make sure the battery is charged and there are no problems with charging.
-
Check the controller : The controller of your machine may be defective. Check if you can hear any sounds made by the controller when you press the accelerator. Otherwise, it is likely that the controller is defective.
-
Check the engine : Make sure that your electric scooter's motor is working properly and that there are no overheating or blocking issues.
If you are unable to find where the problem is coming from, we advise you to contact one of our experts in the field in order to repair your electric scooter quickly!
Do not hesitate to make an appointment in one of our electric scooter repair centers and sales.
-
Why change it accelerator of my electric scooter?
In the event of a failure or malfunction, you will no longer be able to comfortably control your electric vehicle. A accelerator for scooter electric can break down following an impact or even due to wear of certain of its components. This can cause technical incidents and malfunctions on your product.
If you notice abnormal acceleration, an error code or even unwanted beeps on your display, you may need to replace it with a new one.
In the event of a fall of the electric scooter
During an accident, your vehicle's display may be damaged. Indeed, the latter is particularly exposed at the handlebar level.
An impact may cause breakage of the screen or display. Even if in some cases it is possible to ride without the screen display, you will no longer have access to the information on your scooter.
We therefore advise you to change your accelerator. You will then once again have access to all the information on the condition of the vehicle live.
By opting for this new replacement accelerator, you can be sure to find comfort of use like the first day!
Water Infiltration
Also remember to protect your accelerator when driving in the rain.
Generally not waterproof, this component can simply burn out if water infiltrates inside. Of course, we do not recommend driving in rainy weather so as not to damage your machine.
It may be helpful to seal the display by opening it and adding silicone inside. This will make your equipment less sensitive to the presence of water.
-
How to replace an electric scooter accelerator?
For replace the display with a new model, all you will need is a screwdriver and a few minutes of your time.
-
First, you will need to turn off your scooter through your display.
-
Dismantle your old accelerator by unscrewing it at the handlebars.
-
Disconnect the connector cable.
-
Install your new accelerator, remembering to reconnect the cable.
-
Check that the new accelerator works by operating your scooter with the wheels in the air for added safety.
-
How do I adjust the maximum speed of the accelerator of my electric scooter?
The way of adjust the maximum speed of the accelerator of your electric scooter will depend on the model of your scooter and the manufacturer. It is therefore important to consult your scooter's user manual for precise instructions.
Here are some general methods to adjust the maximum throttle grip speed of an electric scooter:
-
Using a mobile app : Some electric scooters are equipped with a dedicated mobile application that allows you to adjust various parameters, including the maximum speed of the accelerator. Simply log into the app using a smartphone and follow the instructions to set the maximum speed.
-
Using the control buttons on the scooter display : Some electric scooters may have control buttons on the throttle grip or on the scooter frame that allow you to adjust the maximum speed. It is important to consult the user manual to learn how to use these control buttons.
-
Using the control keys on the display : Some displays for electric scooters may have control buttons that allow you to adjust the maximum speed. It is important to consult the user manual to learn how to use these control keys.
It is important to note that some countries or regions have maximum speed laws for electric scooters. It is therefore important to check and respect the legal maximum speed limits in force in your geographical area.
The electric scooter display: An essential piece
When using an electric scooter, it is important to understand how the accelerator works. First of all, it is important to note that the accelerator can be a lever, a trigger or a button located on the handlebars of the scooter.
It is connected to a electronic sensor in the motor which sends a signal to the controller to increase the speed of the scooter. When using the throttle, it is recommended to start slowly and gradually increase speed.
The display can be a simple LED screen or a more complex LCD screen allowing allows you to view various information such as speed, distance traveled, battery life, etc.
To use the display effectively, it is recommended to take the time to fully understand the information displayed, in order to be able to monitor speed and battery life during use.
It is also important to regularly check the condition of the display, in particular to ensure that the information displayed is correct and that the screen is well protected against shocks and bad weather. If there is a problem with the display of your electric scooter, it is advisable to contact a professional to carry out the necessary repairs.
Why Buy Spare Parts from Weebot?
At Weebot, you get all the benefits of premium quality. As lleader of electric mobility in France, we offer you unrivaled support, with professional advice available by phone or email, as well as free delivery and superior technical support.
We are more than just a reseller. Thanks to our expertise in electric scooters, we design our products to meet high quality requirements.
You can be sure to buy a accelerator of superior quality qwhether it is for an electric scooter Xiaomi M365 Pro, Dualtron, Weebot, Welcome, Speedway, Speedtrott, Zero, E-Tow, Vsett, Eroz Tavern or Inöe we have the part available in stock.
-
#1 Fast delivery
By purchasing accelerators for your electric scooter with us, you are guaranteed to receive a high-end spare part in lFast delivery available within 48 hours!
-
#2 Payment in installments
For us, the mobility sector must be available to everyone to facilitate your daily journeys.
Thanks to our partners, you are offered the possibility of paying in 2 to 48 installments !
-
#3 Service client
During these 10 years in the sector of electric mobility, we have supported thousands of customers throughout France. We manage to find a solution to any problem. We make sure that you are the center of our attention in order to provide you with quality service.
We strive every day to continually improve our processes and nos services with the aim of offering you the best possible customer experience.
-
#4 Our stores in France
Today, Weebot has been present in the electric mobility market for 10 years and is present in several cities such as Paris (Boulogne Billancourt and Courbevoie), Bordeaux and Lyon!
-
Weebot Paris Service Center - Boulogne Billancourt - Telephone: 01 80 89 45 52
-
Boutique Show Room Weebot Paris - Courbevoie - Telephone: 01 80 89 45 52
-
Weebot Lyon Service Center - 2nd District - Telephone: 04 91 91 66 81
-
Service Center Weebot Bordeaux - Centre Ville - Telephone: 05 64 88 03 00
If you have any concerns about the electric scooter display, do not hesitate to contact our technical service available every day from Monday to Friday at the following address sav@wee-bot.com.
Our teams will assist you in resolving the problem you may have encountered remotely or on site!
Also benefit from fast and hassle-free delivery!
-
#5 Guarantee
At Weebot we want you to feel safe when purchasing a electric scooter spare part.
This is why we offer a 2 year warranty against defects and breakage of spare parts. And if you ever encounter a problem, we take care of everything! We will pick up your scooter from your home and bring it back to our service centers in Lyon, Boulogne-Billancourt or Bordeaux.
Additionally, if you are close to one of our centers, you can also bring your scooter directly for a quick diagnosis. We offer a premium service that far exceeds what our competitors offer.
